G1026 Heavy-Duty Shaper
-39-
SECTION 10: CLOSURE
The following pages contain general machine
data, parts diagrams/lists, and Warranty/Return
information for your Model G1026 3 H.P. Wood
Shaper.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service Department.
Our trained service technicians will be glad to help
you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in
Section
2: Introduction. The specifications, drawings,
and photographs illustrated in this manual rep
-
resent the Model G1026 as supplied when the
manual was prepared. However, due to Grizzly’s
policy of continuous improvement, changes may
be made at any time with no obligation on the part
of Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, add the new
information to this manual and keep it for refer
-
ence.
We have included some important safety mea
-
sures that are essential to this machine’s opera
-
tion. While most safety measures are generally
universal, Grizzly reminds you that each workshop
is different and safety rules should be considered
as they apply to your specific situation.
We recommend you keep a copy of our cur-
rent catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Service
Department listed in Section 2: Introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
The Model G1026 was specifically designed
for wood shaping operations only. DO NOT
MODIFY AND/OR USE THIS MACHINE FOR
ANY OTHER PURPOSE. Modifications or
improper use of this tool will void the war
-
ranty. If you are confused about any aspect
of this machine, DO NOT use it until all your
questions have been answered. If you DO,
serious personal injury may occur.
Like all power tools, there is danger associ-
ated with the Model G1026 Wood Shaper.
Accidents are frequently caused by lack
of familiarity or failure to pay attention.
Use this tool with respect and caution to
lessen the possibility of operator injury. If
normal safety precautions are overlooked
or ignored, serious personal injury may
occur.
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when oper
-
ating equipment. Everyday glasses or read
-
ing glasses only have impact resistant
lenses, they are not safety glasses. Be
certain the safety glasses you wear meet
the appropriate standards of the American
National Standards Institute (ANSI).
To Next Page
Loading...
Need help?
General
