Grote 522 User Manual

DISCLAIMER
5/2/2011
Dear Customer,
The Grote Equipment Manual supplied to you is for the used equipment listed below. It is a copy
of the original manual which was correct and complete to contemporary standards at the time the
machine was released in factory "new" condition. Any modifications to the equipment since it left
Grote Service oversight, or performed without our knowledge, may not be included in the manual.
The Grote Company makes no warranty of any kind concerning the material contained within this
manual.
In addition, parts listed may now be obsolete since the time the manual was released. When
ordering parts by Grote part number, our Customer Service representatives will be able to alert
you if a part is obsolete. They may not be able to advise you if the part will be usable in the
current configuration of the machine. Grote Customer Service and Engineering will be happy to
assist you in determining which parts will work. Adequate detailed information regarding the
current state of your machine should be provided through photographs, drawing mark-ups, etc.
The design of the machine, as well as the information provided in the manual regarding safety
and sanitation guidelines, were complete and appropriate to industry standards at the time of the
original sale of the equipment. Please have your company's regulatory bodies examine the
machine for safety and sanitation compliance to current industry standards.
Equipment List
Slicer/Applicator
Model: 522 Serial Number: 1065029
Regards,
The Grote Company
1-888-534-7683
GROTE COMPANY
1160 Gahanna Parkway
Columbus, Ohio 43230
Telephone 614-868-8414 Fax 614-863-1647
www.grotecompany.com

Grote 522 Specifications

General

Brand	Grote
Model	522
Category	Kitchen Appliances
Language	English

Summary

Disclaimer and Introduction

Dear Customer,

Formal address to the reader of the manual.

Equipment List

Lists the specific equipment covered by the manual.

Safety and Warranty Information

ATTENTION

Crucial safety warnings and operational responsibilities.

WARRANTY

Details the machine's warranty period and terms for defects.

Operation and Maintenance

Power Systems and Safety

Describes Hydraulic/Electric systems and safety cabinetry.

Lubrication and Blade Systems

Covers lubrication, blade scrapers, guides, and tracking.

Adjustment Procedures

Covers blade guide, product holder, stroke, speed, gap, and tray adjustments.

Troubleshooting

Product Quality Issues

Guides for product thickness, stacking, curling, and releasing problems.

Machine Operation Issues

Guides for pump, blade, pendulum, and counting problems.

Sanitation

Recommended Cleaning Compound

Recommends specific cleaning compounds for the machine.

Guidelines for Cleaning

General guidelines and safety precautions for cleaning the machine.

Spare Parts and Drawings

SPARE PARTS LIST

Introduces the spare parts list and Grote's recommendations.

DRAWINGS

Explains that assembly drawings and electrical schematics are provided.

Technical Schematics

Hydraulic Circuit Diagram

Provides the hydraulic circuit diagram for the slicer.

Electrical Schematic

Details the electrical schematic and inverter settings.