Slicer/Applicator
SS-10.DOC:1/26/2007 11:08 AM
Grote Company
35
8. The above procedure resets the memory on the intelligent fiber-optic amplifier so that
the highest contrast of light levels is seen (“no target” versus complete darkness).
Noise Characteristics -
Hydraulic Slicers
The noise levels of Models 517, 522, and 530 Slicer/Applicators have been measured at various
positions around the slicer. The data shown below illustrates the positions and lists the decibel
levels of the noise.
To Next Page
Loading...