Slicer/Applicator
SS-10.DOC:1/26/2007 11:08 AM
Grote Company
52
OPERATOR INTERFACE INFORMATION
Grote service personnel usually install new machines and provide instruction and training of the
customer’s operating personnel. For this reason not all manuals contain Operator Interface
information.
However, for some machines information about the Operator Interface is contained in the following
pages. Descriptions of the Operator Interface apply uniquely to the machine identified by the Serial
Number on the front cover of this manual.
Screens are pictured and a description of the buttons appearing on the screens is provided. Other
information about how to setup and operate the slicer is sometimes included.
Operator Interface Information Is Not Included For
This Machine. Rely upon the training given when
machine is installed. Contact the Grote Company
Service Department if additional information is
required.
To Next Page
Loading...