Grote 522 - Machine Operation Issues

Slicer/Applicator
SS-10.DOC:1/26/2007 11:08 AM Grote Company 46
Chart 12: Pump Won’t Run or Pump Pressure Low (Hyd Slicers)
Chart 13: Blade Won’t Run
Wrong Voltage
No Voltage
Wrong Voltage
Pump Won’t Run Or Pump Pressure Low
Blade Won’t Run
Overload Tripped
Overload Tripped
Check for proper settings and output.
Check for proper setting and output. Check line polarity.
No Pressure
Blade Frozen
Check incoming voltage for proper supply. Check E-stops.
Check incoming voltage. Check E-stops.
Check for proper rotation.
Check line polarity. Check
return and suction filters.
Check blade and guide for prod
uct residue. Check water
reservoir and applicator pad if provided. Retrack blade
according to manual. (See Page 29).