Grote 522 - Chart 2: Product Thickness Varies from Front to Back

Slicer/Applicator
SS-10.DOC:1/26/2007 11:08 AM Grote Company 38
Chart 2: Product Thickness Varies From Front To Back
Not Enough Product
Weight in Product
Holders
Product Thickness Varies From Front to Back
Improper Loading
Of Product
Stop machine. Check product and tube sizes for
proper fit.
Blade Not
Tracking Correctly
Product holders must be at least 2/3 full.
Check blade and guide for product residue. Check
water reservoir and water applicator pad if provided.
Retrack according to manual (See Page 29).
Blade Guide Not
Adjusted
Check manual for proper settings (See Page 15).
Slice Gap Not Set
Correctly
Reset slice gap according to chart in manual (See
Page 26).
Place straight edge on blade guide and reset
thickness tray level from front to back at ground
zero.
Tray Not Level
From Front To
Back