Grote 522 - Chart 1: Product Thickness Varies from Side to Side

Slicer/Applicator
SS-10.DOC:1/26/2007 11:08 AM Grote Company 37
Chart 1: Product Thickness Varies From Side To Side.
Not enough Product
Weight in Product
Holders
Product Thickness Varies From Side To Side
Improper Loading
Of Product
Stop machine. Check product and tube sizes for
proper fit.
Blade Not Tracking
Correctly
Product holders must be at least 2/3 full.
Check blade and guide for product res
idue. Check
water reservoir and water applicator pad if provided.
Retrack according to manual (See Page
29
).
Slice Gap Not Set
Correctly
Reset slice gap according to chart in manual (See
Page 26).
Tray Not Level From
Side To Side
Pl
ace straight edge on blade guide and reset thickness
tray level from side to side.