Slicer/Applicator
SS-10.DOC:1/26/2007 11:08 AM
Grote Company
43
Chart 8: Rough Or Chafed Product
Chart 9: Product Fracturing
Proper Amount Of
Water
Product
Temperature
Rough Or Chafed Product
Product Fracturing
Dull Blade or
Improper Installation
Product Dropping Off
Thickness Tray
Before Finishing
Slicing
Replace blade. Check for proper blade bevel installation.
Check slice gap and thickness tray for proper settings and
range. Slice gap can be set too wide. (See Page 26).
Improper Blade
Guide
(Non Water-
Injected Blade Guide Machines) Refill water
reservoir. Check water applicator pad for product residue
Are you in the correct range?
Has the blade guide been changed recently? Do you have
the proper style blade guide? Contact Grote Service
Department @ 1-888-JEGROTE Monday - Friday 8am -
5pm.
Do you have the proper blade for what you are trying to
slice? Contact Grote Service Department @
1-888-JEGROTE Monday - Friday 8am - 5pm.
Wrong Style
Blade
To Next Page
Loading...