ï‚· The Power GND Check detects if the ground
terminal from power cord of instrument
connects to earth ground properly.
ï‚· Barcode Function Setting is a feature which
facilitates fast yet convenient MANU and
AUTO tests for, in particular, assembly line
application. It enables GPT-10000 series,
with additional barcode scanner plugged
in, to scan barcodes and edit into a list for
prompt utilization in diversified tests.
1. Press the SYSTEM button on the
front panel when the tester is
under READY status in either
MANU or AUTO test.
2. The SYSTEM page will be shown.
Press the UP/DOWN arrow soft-
keys to move the cursor to the
CONTROL setting.
3. Press the ENTER soft-key to enter
the Control By setting followed by
using the scroll wheel to select the
following options.
To Next Page
Loading...
Need help?
General
