GW Instek GPT-12004 User Manual

GPT-10000 Series User Manual
58
It is easy to set a preferred percentage of the
test voltage in the INIT VOLTAGE setting and
the starting test voltage will commence from
the value corresponding to the set percentage
relative to the target test voltage.
Note
INIT VOLTAGE setting is only applicable to both
ACW and DCW tests.
Steps
1. Press the PAGE soft-key to move to
the 3/3 page where the INIT
VOLTAGE setting appears for
ACW and DCW.
2. Press the UP / DOWN arrow soft-
keys to bring the cursor to the INIT
VOLTAGE setting.
INIT VOLTAGE cursor
3. Use the scroll wheel to set the
percentage of INIT VOLTAGE.
INIT
VOLTAGE
000% ~ 099%

GW Instek GPT-12004 Specifications

General

Brand	GW Instek
Model	GPT-12004
Category	Measuring Instruments
Language	English