GW Instek PSU 100-15 User Manual

COMMUNICATION INTERFACE
163
4
5
6
7. Click on Configuration.
8. Click on the GPIB Settings tab and confirm that
the GPIB settings are correct.
7
8
9. Click on the I/O Settings tab.
10. Make sure the Enable Termination Character
check box is checked, and the terminal
character is \n (Value: xA).
11. Click Apply Changes.

GW Instek PSU 100-15 Specifications

General

Brand	GW Instek
Model	PSU 100-15
Category	Power Supply
Language	English