User Manual
H3C S1526 Smart Ethernet Switch
Chapter 3 Configuration Through
Console Port
3-11
2( 3)
Add another port?(Y/N):y
Add management port(1-26): 3
Port 3 is added to VLAN 3 successfully!
For example, change the management VLAN to be the
existing VLAN 2, and add Port 3 to the management VLAN.
Management VLAN ID(1-4094): 2
Ports(pvid) in the management VLAN:
6( 2) 9( 2)
Add another port?(Y/N):y
Add management port(1-26): 3
Port 3 is added to VLAN 2 successfully!
Note:
z The port number ranges from 1 to 26. In a command line,
you can only add one port to the management VLAN at a
time.
z When you add a port to the management VLAN in a
command line, the PVID of the port is automatically changed
to be the ID of the management VLAN.
z To remove a port from the management VLAN, log in to the
Web-based NMS for configuration. For details, refer to
section
2.6.2 “ 802.1Q VLAN”.
To Next Page
Loading...
Need help?
General
