User Manual
H3C S1526 Smart Ethernet Switch Chapter 4
Typical Configuration
4-8
7) Save configuration. Click [Save Config] after you have
completed the configuration and click <Save> to save
the configuration you have made. The configurations
will take effective after reboot.
8) The network design is completed. After installation of
the S1526, assign ports 1 through 4 to PCs of the
Finance Dept. and ports 5 through 24 to PCs of other
departments. Connect ports 25 and 26 of the S1526 to
the S5000P and connect one computer to the S5000P
to manage the S1526. Note that this management
computer should be in VLAN 1.
To Next Page
Loading...
Need help?
General
