1-19
2.5G/1000/
100BASE-T
autosensin
g Ethernet
port
N/A N/A N/A 8 N/A
SFP port N/A N/A 2 N/A
4 (Each and its
corresponding
10/100/1000B
ASE-T
autosensing
Ethernet port
form a combo
interface.)
SFP+ port 2 4 N/A 2 4
Input
voltage
AC power source:
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
DC power source: H3C RPS1600-A (supported only by the S5130S-28MP-HPWR-EI and
S5130S-10MS-UPWR-EI switches)
• Rated voltage: –54 VDC to –57 VDC
• Max voltage:
Single DC input: –44 VDC to –60 VDC
AC and DC inputs: –54 VDC to –57 VDC
Maximum
PoE power
per port
90 W
Ports 1 to 8: 90
W
Ports 9 to 24: 30
W
30 W 90 W 30 W
Total PoE
power
AC: 370 W AC: 370 W
• AC: 370 W
• DC: 740 W
• AC: 370 W
• DC: 740 W
370 W
Minimum
power
consumptio
n
AC: 12 W AC: 14 W
• AC: 26 W
• DC: 36 W
• AC: 23 W
• DC: 18 W
16 W
Maximum
power
consumptio
n (including
PoE power
consumptio
n)
AC: 402 W AC: 405 W
• AC: 446 W
• DC: 820 W
• AC: 447 W
• DC: 794 W
445 W
Chassis
leakage
current
compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
Melting
current of
power
supply fuse
10 A/250 V 15 A/250 V
Cooling
system
Passive cooling
Using fixed fan trays to draw ambient
air in from the left side and exhaust
heated air from the right side.
Using fixed fan
trays to draw
ambient air in
from the left
side and port
side and
To Next Page
Loading...
