H3C S5130S-EI series - SFP+ Port

4-57
FE SFP transceiver
module
Central
wavelength
Connector Fiber
Max
transmission
distance
mode
SFP-FE-
LX-SM1
310-BIDI
You must
use these
two
transceiver
modules in
pairs.
• TX: 1310 nm
• RX: 1550 nm
LC
9/125 µm, single
mode
15 km (9.32 miles)
SFP-FE-
LX-SM1
550-BIDI
• TX: 1550 nm
• RX: 1310 nm
LC
NOTE:
•
As a best practice, use H3C SFP transceiver modules and cables for the SFP ports.
•
The H3C SFP transceiver modules and cables available for the SFP ports
are subject to change
over time. For the most up-to-date list of H3C SFP transceiver modules and cables
available for
the SFP ports, contact your H3C sales representative or technical support engineer.
•
For the specifications of the H3C SFP transceiver modules and cables, see H3C Transceiver
Modules User Guide.
SFP+ port
The SFP+ ports on the switch support the following transceiver modules and cables:
•
GE SFP transceiver modules in Table4-8.
•
10-GE SFP+ transceiver modules in Table4-10.
•
10-GE SFP+ cables in Table4-11.
Table4-10 10-GE SFP+ transceiver modules available for the SFP+ ports
10-GE SFP+
transceiver
module
Central
wavelength
Connector Fiber
Modal
bandwidth
(MHz*km)
Max
transmission
distance
SFP-XG-SX-MM85
0-D
850 nm LC
50/125 µm
multi-mode
optical fiber
2000 300 m (984.3 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125 µm
multi-mode
optical fiber
200 33 m (108.27 ft)
160 26 m (85.30 ft)
SFP-XG-SX-MM85
0-E
850 nm LC
50/125 µm
multi-mode
optical fiber
2000 300 m (984.3 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125 µm
multi-mode
optical fiber
200 33 m (108.27 ft)
160 26 m (85.30 ft)
SFP-XG-SX-MM85
0 S
850 nm LC 50/125 µm
li d
2000 300 m (984.3 ft)