H3C S5130S-EI series Hardware Information

4-58
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125 µm
multi-mode
optical fiber
200 33 m (108.27 ft)
160 26 m (85.30 ft)
SFP-XG-LX-SM131
0-D
1310 nm LC
9/125 µm
single-mode
optical fiber
N/A 10 km (6.21 miles)
SFP-XG-LX-SM131
0-E
1310 nm LC
9/125 µm
single-mode
optical fiber
N/A 10 km (6.21 miles)
SFP-XG-LX-SM131
0-S
1310 nm LC
9/125 µm
single-mode
optical fiber
N/A 10 km (6.21 miles)
SFP-XG-LH40-SM1
550
1550 nm LC
9/125 µm
single-mode
optical fiber
N/A 40 km (24.86 miles)
SFP-XG-LH40-SM1
550-D
1550 nm LC
9/125 µm
single-mode
optical fiber
N/A 40 km (24.86 miles)
SFP-XG-LH80-SM1
550
1550 nm LC
9/125 µm
single-mode
optical fiber
N/A 80 km (49.71 miles)
SFP-XG-LH80-SM1
550-D
1550 nm LC
9/125 µm
single-mode
optical fiber
N/A 80 km (49.71 miles)
SFP-XG-LX-SM127
0-BIDI
• TX:1270
nm
• RX:1330
nm
LC
9/125 µm
single-mode
optical fiber
N/A 10 km (6.21 miles)
SFP-XG-LX-SM133
0-BIDI
• TX:1330
nm
• RX:1270
nm
LC
9/125 µm
single-mode
optical fiber
N/A 10 km (6.21 miles)
SFP-XG-LH40-SM1
270-BIDI
• TX:1270
nm
• RX:1330
nm
LC
Single-mode
, 9/125
N/A 40 km (24.86 miles)
SFP-XG-LH40-SM1
330-BIDI
• TX:1330
nm
• RX:1270
nm
LC
Single-mode
, 9/125
N/A 40 km (24.86 miles)
IMPORTANT:
The
SFP-XG-LX-SM1270-BIDI and SFP-XG-LX-SM1330-BIDI transceiver modules and the
SFP
-XG-LH40-SM1270-BIDI and SFP-XG-LH40-SM1330-BIDI transceiver modules must be used
in pairs. For example, if one ends uses an
SFP-XG-LX-SM1270-BIDI
transceiver module, the other
end must use an SFP-XG-LX-SM1330-BIDI transceiver module.

H3C S5130S-EI series Specifications

General

Series	S5130S-EI
Category	Switch
MAC Address Table Size	16K
VLAN	4K VLANs
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	5% to 95% (non-condensing)
Ports	10/100/1000BASE-T ports
Layer Support	Layer 3
Stacking	Supported
Power Supply	AC/DC
PoE	Supported on some models
Dimensions (W x D x H)	440 x 43.6 mm