H3C S5130S-EI series - Management Ethernet Port; 10;100;1000 BASE-T Autosensing Ethernet Port; 5 G;2.5 G;1000 BASE-T Autosensing Ethernet Port

4-50
Management Ethernet port
The S5130S-28F-EI and S5130S-28PS-EI switches each have one management Ethernet port. You
can connect the port to a local PC for software loading and debugging or to a remote management
station for remote management.
Table4-2 Management Ethernet port specifications
Item Specification
Connector type RJ-45
Transmission rate, duplex mode,
and auto MDI/MDI-X
• 10 Mbps, half/full duplex
• 100 Mbps, half/full duplex
• MDI/MDI-X autosensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Compatible standards
• IEEE 802.3i
• IEEE 802.3u
• IEEE 802.3ab
Functions and services Software upgrade and network management.
10/100/1000BASE-T autosensing Ethernet port
Table4-3 10/100/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Transmission rate, duplex mode, and
auto MDI/MDI-X
• 10 Mbps, half/full duplex
• 100 Mbps, half/full duplex
• 1000 Mbps, full duplex
• MDI/MDI-X autosensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Compatible standards
• IEEE 802.3i
• IEEE 802.3u
• IEEE 802.3ab
5G/2.5G/1000BASE-T autosensing Ethernet port
The S5130S-28MP-EI, S5130S-28MP-HPWR-EI, and S5130S-52MP-EI switches provide
5G/2.5G/1000BASE-T autosensing Ethernet ports.
Table4-4 5G/2.5G/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Transmission rate, duplex mode, and
auto MDI/MDI-X
• 1 Gbps, full duplex
• 2.5 Gbps, full duplex