1-12
Item S5130S-28S-EI-DP
S5130S-28ST-
EI
S5130S-52ST-EI
S5130S-28PS-
EI
Chassis
leakage current
compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
Melting current
of power
supply fuse
2 A/250 V 2 A/250 V 2 A/250 V 2 A/250 V
Cooling system
Using fixed fan trays to draw ambient air in from the chassis left side and exhaust heated
air from the chassis right side.
Operating
temperature
–5°C to +45°C (23°F to 113°F)
Operating
humidity
5% to 95%, noncondensing
Fire resistance
compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
PoE switch models
Table1-8 Technical specifications for PoE switch models (1)
Item S5130S-10P-HPWR-EI S5130S-12TP-HPWR-EI S5130S-20P-PWR-EI
Dimensions (H × W
× D)
43.6 × 330 × 230 mm
(1.72 × 12.99 × 9.06 in)
43.6 × 330 × 230 mm (1.72 ×
12.99 × 9.06 in)
43.6 × 330 × 230 mm
(1.72 × 12.99 × 9.06 in)
Weight ≤ 3 kg (6.61 lb) ≤ 3 kg (6.61 lb) ≤ 3 kg (6.61 lb)
Console port 1 × serial console port 1 × serial console port 1 × serial console port
10/100/1000BASE-
T autosensing
Ethernet port
8
10 (The two
highest-numbered
10/100/1000BASE-T
autosensing Ethernet ports
form combo interfaces with
their corresponding SFP
ports, respectively.)
16
SFP port 2
4 (The two lowest-numbered
SFP ports form combo
interfaces with their
corresponding
10/100/1000BASE-T
autosensing Ethernet ports,
respectively.)
4
Input voltage
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
Maximum PoE
power per port
30 W
30 W
The combo copper ports on
an S5130S-12TP-HPWR-EI
switch do not support PoE
power supply.
30 W
Total PoE power 125 W 125 W
Models with product
code
LS-5130S-20P-PWR-EI
: 170 W
To Next Page
Loading...
Need help?
General
