1096LE005550A
Starting, commissioning, operation
4.7 Commissioning via the HTP610H configuration tool
Measurement settings in the HTP610H tool
Managing the alarms and output contacts of the Energy circuit breaker
The Energy circuit breaker measurement parameters can be modified. The settings
for the alarms and PTA and OAC output contact measurement parameters can be
accessed from the Trip alarm and output contact parameters sub-menus.
Custom alarm settings in the HTP610H tool
Consult the user manual for the HTP610H configuration tool beforehand to read
the explanations and instructions for managing the alarms.
To Next Page
Loading...
