1136LE005550A
Starting, commissioning, operation
4.8 Operation
Information available on the HTD210H panel display
The measurements selected as favourites can be viewed constantly thanks to Live
mode.
Note
The favourites on the panel display are selected and configured independently of
the embedded display of the h3+ Energy circuit breaker.
The HTD210H panel display indicates the following information relating to the LEDs:
Alarm
Flashing red if a medium or high priority level alarm is
activated.
Communication
Flashing yellow to indicate data trac between the display
and the Energy trip unit.
Ready
Permanent green if the display is switching on and functional.
In addition, it indicates the occurrence of high priority alarms in the form of pop-ups.
To Next Page
Loading...
