Wireless AP Router HNW300APN2
User Manual 98
8. If the device PIN is correct and the WPS handshake is successfully done, AP’s Wi-Fi Protected Setup
page will be shown as below.
Other pages such as Wireless Basic Settings page and Wireless Security Setup page will also be
updated appropriately as described in previous sections. In this case, AP is in un-configured state before
the station initiates the WPS handshake. According to the WPS spec, AP will create a wireless profile
with WPA2-mixed mode and a random-generated key upon successfully doing the WPS handshake.
However, AP will use the original wireless profile and give it to the station if AP is already in configured
state. That means all settings of AP will not change. Hence, all WPS related pages keep the same.