Hanlong UC802(P) - WAN Port

Table of Content
26
Press the Save soft key to accept the change or the Back soft key to cancel. If you are using an
xDSL modem, you can connect your phone to the Internet via PPPoE mode. You can set a WAN
port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to obtain the IP address.
Contact your system administrator for the PPPoE user name and password.
To configure PPPoE via phone interface:
1. Press Menu

Setting

Advanced Settings (password: admin)

Network

WANPort
PPPoE mode.
2. Enter the User ID and password
3. Click Save and restart the phone.
To configure DHCP via phone interface:
1. Press Menu

Setting

Advanced Settings (password: admin)

Network

WANPort
DHCP mode.
2. Click Save and restart the phone.
To configure Network via web interface:
1. Click Network

Basic
2. Select the desired Type: DHCP, Static or PPPoE