Hanlong UC802(P) - Transfer

Table of Content
93
key1(for example)
2. Select the wanted Memory key.
3. Press
and
key to select the Transfer in the type field.
4. Enter the Number that transfer to
5. Press
or Save soft key to save the configuration
To configure Transfer via Web Interface
1. Click Function keys →Memory Key.
2. Select the desired Key and select Transfer in the Type.
3. Enter the Value with the number that wanted transfer to
4. Click the to save the configuration.
Hold
The key can be configured as a hold key. You can use this key to hold and resume a call during the
conversation.
To configure the Hold via Phone Interface
5. Press Menu → Features → Function Keys → Memory keys as Function Keys → Memory
key1(for example)
6. Select the wanted Memory key.
7. Press
and
key to select the Hold in the type field.
8. Press
or Save soft key to save the configuration