Hanlong UC802(P) - Forward

Table of Content
92
Forward
If the key is configured as Forward key, press this key under the idle status, the IP phone will turn
to the Always Forward interface and you can set the Forward to number, then when there is any
call to the number will be forwarded to the set number automatically.
To configure the Forward via Phone Interface
1. Press Menu → Features → Function Keys → Memory keys as Function Keys → Memory
key1(for example)
2. Select the wanted Memory key.
3. Press
and
key to select the Forward in the type field.
4. Enter the Number that to forward.
5. Press
or Save soft key to save the configuration
To configure Forward via Web Interface
1. Click Function keys →Memory Key.
2. Select the desired Key and select Forward in the Type.
3. Enter the Value with the number you want to forward
4. Click the to save the configuration.
Transfer
You are able to configure the key as a transfer key to perform the Blind/Attended Transfer.
To configure the Transfer via Phone Interface
1. Press Menu → Features → Function Keys → Memory keys as Function Keys → Memory