Hanlong UC802(P) - Time and Date

Table of Content
30
Note:
All languages may not be available for selection. The available languages depend on the language
packs currently loaded to the IP phone.
Time and Date
The time and date show on the idle page, and it can be set and change by SNTP server
automatically or manual setting.
To configure the time and Date by SNTP setting
9. To press Menu → Setting → Basic setting → Time & Date → SNTP Settings
10. Press
or
, or info soft key to change the Time zone.
11. Fill the NTP server1, NTP Server2, and Daylight Saving.
12. Press
or Save soft key to save the configuration.
To configure time and date manually
13. To press Menu → Setting → Basic setting → Time & Date → Manual Settings
14. Press
and
or change the right time, or you can input the right time.
15. Press
or Save soft key to save the configuration.