Hanlong UC802(P) - Call Forward

Table of Content
64
27. D answering the call.
28. A press the conference soft key, then A, B, C and D are now in a conference.(and now this is
4-way conference)
29. A press line key 4, the call is placed on hold.
30. A enter the number of E and then press send soft key or
.
31. E answering the call.
32. A press the conference soft key, then A, B, C, D and E are now the 5-way conference is built.
33. A end the call, the conference is finished.
Note:
34. If C does not answer the call, A can back to continue the conversation with B;
35. Once A hangs up the call, the conference is ended, while if B or C drops the call, A&C or A&B
conversation continues.
36. The conference feature is not available on all servers. For more information, contact your
system administrator.
37. To realize the 5 way conference, the line should be all available.
Call Forward
This phone supports static forward (always forward, busy forward and no answer forward) and
dynamic forward
To configure static forward
To configure always forward
With this feature, all incoming calls will forward immediately to configured number.
38. Press Menu → Features → Call forward →Always Forward.
39. Press
and
or press info soft key to select the enable choice