Programmable Temperature & Humidity Controller
72
Parameter Setting range Default
Temperature control signal rely Max 0 ~ 32 0
Temperature control signal delay 0 ~ 9999 0 sec
Humidity control signal rely Max 0 ~ 32 0
Humidity control signal delay 0 ~ 9999 0 sec
Temperature sensor burnout relay Max 0 ~ 32 0
Temperature sensor burnout holding 0 ~ 9999 0 min
Humidity sensor burnout relay Max 0 ~ 32 0
Humidity sensor burnout holding 0 ~ 9999 0 min
Temperature ascending range relay Max 0 ~ 32 0
Temperature ascending range deviation Temperature EUS(0 ~ 100 %) 0 ℃
Humidity ascending range relay Max 0 ~ 32 0
Humidity ascending range deviation Humidity EUS(0 ~ 100 %) 0 %
Temperature holding range relay Max 0 ~ 32 0
Temperature holding range deviation 0 ~ 9999 0 min
Humidity holding range relay Max 0 ~ 32 0
Humidity holding range deviation 0 ~ 9999 0 min
Temperature descending range relay Max 0 ~ 32 0
Temperature descending range deviation Temperature EUS(0 ~ 100 %) 0 ℃
Humidity descending range relay Max 0 ~ 32 0
Humidity descending range deviation Humidity EUS(0 ~ 100 %) 0 %
Example of relay operation state by temperature ascending/holding/descending setting of setting value(SV).
Example of relay operation state with ascending section setting temperature(-10 ℃), holding section setting
temperature(2M), and descending section setting temperature(+20 ℃).
RELAY
RELAY
RELAY
Temperature
ascending
Temperature
Holding (3M)
Temperature
Descending
Temperatur
Holding
sections
Ascending
Holding setting
= 2M
Descending
Fig. 114) DO - Ascending/Holding/Descending
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
Need help?
General
