4
Introduction
As leaders in the field of sterilization, our goal is
to engineer and manufacture safe, efficient,
quality sterilization products. We are certain you
will agree that this sterilizer meets our goal.
Regardless of how well a piece of equipment is
designed, misuse, abuse, or neglect will deny its
owner the safe, efficient, quality service
expected. Often, misuse, abuse or neglect occurs
unintentionally because the operator is unaware
of the proper operating and maintenance
procedures. This manual provides you with the
information required to properly operate and
routinely maintain your sterilizer. The information
included in this manual applies to all models
unless noted for specific models.
We urge you to read this manual carefully before
operating the unit, and retain it for future
reference.
Operation Overview
Hydroclave MC8 and MC10
Steam Sterilizer
The MC8 and MC10 sterilizer operates on the
principle of heated water converted to steam in a
sealed pressure chamber.
What happens when the controls are turned
on?
• The chamber vent valve opens and the
heater turns on to warm up the chamber.
The items to be sterilized are placed on
To Next Page
Loading...
