6
reservoir through tubing below the water
level in the reservoir. The water in the
reservoir condenses the steam to a
liquid for reuse in the next cycle.
When the one minute timed vent is
complete an indicator light on the control
panel lights to alert the operator that the
cycle is complete.
Drying cycle
At the completion of the sterilization cycle, the
drying cycle automatically begins. This cycle
continues until the selected time has elapsed or
the door is opened.
To restart a drying cycle that has been terminated
by opening the door; close the door (DO NOT
LATCH) and press the “START” button.
Operator Maintenance
It is important to establish the maintenance
schedule called for in the Operator Maintenance
section of this manual.
Daily
Before each days use: Check the water level in
the reservoir. Refill with distilled or deionized
water if needed. Clean the door gasket and its
mating surface.
INTRODUCTION
To Next Page
Loading...
