To Next Page

To Previous Page

Mechanical installation

T10FS A0785-150 HBM: public 25

6x or 8x fastening screw (10.9/12.9)

6x or 8x (Z) DIN EN ISO 4762 hexagon socket screw (10.9/12.9)

Rotor

Identification number/measuring range

Fig. 5.3 Screwed rotor joint

2. For the bolted rotor connection, use eight DIN EN ISO

4762 property class 10.9 hexagon socket screws

(measuring range w 3 kNVm: 12.9) of a suitable

length (dependent on the connection geometry).

We recommend fillisterhead screws DIN EN ISO

4762, blackened, smoothheaded, permitted size and

shape variance as per DIN ISO 4759, Part 1, product

class A.

WARNING

With alternating load: Use a screw locking device (e.g.

LOCTITE no. 242) to glue the screws into the counter

thread to exclude prestressing loss due to screw

slackening.

Questions and Answers:

Need help?

Do you have a question about the HBM T10FS and is the answer not in the manual?

HBM T10FS Specifications

General