T10FS A0785-150 HBM: public 3
English
1 Safety instructions 6........................................
1.1 Markings used in this document 11..............................
1.2 Symbols on the product 12.....................................
2 Torque flange versions 13....................................
3 Application 15...............................................
4 Structure and mode of operation 16...........................
5 Mechanical installation 18....................................
5.1 Conditions on site 19..........................................
5.2 Installation orientation 20......................................
5.3 Installation options 20.........................................
5.3.1 Installation without dismantling the antenna ring
(without speed measuring system) 21...........................
5.3.2 Installation with subsequent stator mounting
(without speed measuring system) 22...........................
5.3.3 Installation example with couplings 23...........................
5.3.4 Installation example with joint shaft 23...........................
5.4 Mounting the rotor 24..........................................
5.5 Installing the stator 27.........................................
5.6 Installing the clamp fixture 30...................................
5.7 Mounting the slotted disc (optical speed measuring system) 32.....
5.8 Fitting the mounting elements (speed measuring system) 34........
5.8.1 Fixing the mounting elements 35................................
5.8.2 Mounting the torque flange with a speed measuring system 36......
5.9 Aligning the stator (speed measuring system) 38..................
5.9.1 Magnetic speed measuring system 38...........................
5.9.2 Optical speed measuring system 42.............................
To Next Page
Loading...
Need help?
General
