Heal Force Smart-Mini - Data Record of System

37
Description:
FEED: the current feed water conductivity.
RO: pure water conductivity.
DS: Desalination rate for reverse osmosis cartridge.
T: the current system temperature.
PF: used time for pretreatment cartridge.
UV: used time for ultraviolet lamps.
MF: used time for Micro-filter cartridge.
UP: resistivity of ultra pure water
Press "Menu" keypad to return to the previous menu, or press "Menu" keypad
continuously to exit the maintenance setting, the system reboots.
6.5 Data record of system
Smart-Mini system is equipped with a large capacity data storage units, it will record
time, temperature, quality, each water producing volume, the total water producing volume,
the time, the type and the replacement frequency of cartridges.
Refer to Section 3.1 of this chapter into the maintenance settings. Press the "Disp. /
▲
"
or "Flush / ▼ " keypad to select "Data Recorder" White on Black means that has been
selected. As shown below.
Data recorder
cartridge
replace
system
display
data
recorder
manufactory
setting
Press "Stop /

" keypad to confirm, select the record type. As shown below.
Water data Record
Water
Replacement
Record
Record
Operate in accordance with this section to enter data record menu, press "Disp. /
▲
" or
"Flush / ▼" keypad to select water records. White on black means that it has been selected.
Press "Stop /

" button to confirm, LCD displays each record for water producing. As
shown below.