Heal Force Smart-Mini - Chapter 1 General; Confirm the Ordering Products; Safety Information; System Operating Environment

1
Chapter 1 General
1.1 Confirm the ordering products
The manual is written for Smart-Mini series water purification system
The content of the manual can lead users to installation, operation and maintenance of
the Smart-Mini series water purification system
We strongly recommend our users to read and understand the content of the manual
before installation, operation and maintenance
You can easily find the model of the system in the nameplate at the back of the system.
Please contact Shanghai Canrex Analytic Instrument Co., Ltd if you find out any
incorrect description in this manual.
1.2 Safety information
You must use the safety norms according to this manual before using the Smart-Mini
system, especially water and power supply. It is necessary to refer to this manual when you
install or operate the Smart-Mini system. Unqualified using environment will endanger the
normal operation, or even damage the whole system.
The installation, commissioning and maintenance of the equipment can only be
completed by Heal Force or its authorized agents. Heal Force did not responsible for duties
and responsibilities if the equipment is disassembled by unauthorized dealer or service
personnel.
1.3 System operating environment
 Indoor sue
 Avoid direct sunlight
 Between 0-2000 meters altitude
 Ambient temperature: 4-45
℃
 Operating Voltage: AC 220V 50 Hz OR 110V 60Hz
 Inlet pressure: 0.1-0.4MPA.
 The fluctuation range of the main power supply can be 10% of the normal voltage.
 Transient over-voltage power supply is grade 2.
 There is an drains around the equipment(1 meters)
 Adequate indoor ventilation
 Mounting surface must be fixed, level, and not burning
 Avoid direct sunlight