17
Press "Disp. / ▲" keypad you can take the pure water.
If the quality of current ultrapure water can not meet the requirement of original
setting (ie 16.0MΩ.cm), the system will automatically enter recycling mode to improve the
water quality. And if the water quality reaches the set value, the main unit starts to produce
ultra-pure water. As shown below:
When the Smart-Minisystem is in the standby state, the ultrapure water in the loop will
automatically recycle for 5 minutes every 2 hours, which will guarantee the quality of
ultrapure water to the setting requirement. As shown below:
5.6 Parameters setting
Press "Menu" keypad to enter the menu, language selection, as shown below:
To Next Page
Loading...