10
9
8
7
6
5
4
3
2
1
Appendix
Reference
Guides
Alarms and
Emergencies
Patient
Management
Surgical
Implant and
Explant
Monitor
Peripherals
and
Accessories
HVAD
®
Pump Overview
Introduction
114 HVAD® Instructions for Use
CAUTION:
™
prostheses as it will damage the
5. Loosen the graft clamp screw and place the graft clamp over the
lip of the HVAD
®
clamp screw is completely removed or if it falls out, be sure to
re-insert it correctly as the clamp has threads on only one side.
6. Position the clamp screw so that it is located on the inner side
(Figure 104). Tighten the clamp screw until
resistance is met.
WARNING!
conduit to avoid tissue irritation or damage.
WARNING!
damage the graft clamp or graft clamp screw and a loose connection may result in bleeding and/or
an air embolus. Replace components if required.
Figure 104: Position the
clamp screw to inner side
Figure 103:
Figure 102:
6.3 HVAD
®
Pump Pre-Implant Test and Pump Assembly (continued)
Out ow Graft Attachment (continued)
WARNING!
bleeding and/or an air embolus.
4. (Figure 102)
the HVAD
®
(Figure 103). Hemostats can be used to assist with the
kinking or twisting occurs.
To Next Page
Loading...