31
English
Open-source software
Certainsoftwarelibrariesandothersoftwareprograms
are third-party software belonging to the supply scope
oftheAMPERFIEDsoftware.Therighttousethemis
subjecttotherespectiveprovisionsoftheopen-source
licensing contracts.
Youcanobtainacomplete,machine-readablecopyof
thesourcecodeforsuchopen-sourcesoftware(subject
totheapplicableprovisions)byorderingitinwriting
fromAMPERFIED.Thecopyitselfisfreeofcharge,
but the costs for data carriers, despatch and adminis-
trativeexpenseswillbeinvoiced.Simplyspecifyyour
AMPERFIEDsoftwareversiontoobtainacopyofthe
sourcecodefrom:AMPERFIEDGmbH
Hotline:+49622282-2266
Email:service@ampered.com
Initial Web interface logon
Proceed as follows when logging on to the Web inter-
faceforthersttime:
1. Determine the host name
Thehostnameconsistsofadeneddevicedesig-
nation(“HDM-SMART-CONNECT-”)andthelastsix
charactersoftheMACaddressonthecommunica-
tion module (Fig.8).
Example:“HDM-SMART-CONNECT-F431F2”
2. Open the internet browser on your computer, prefer-
ablyGoogleChrome.
3. Enterhttps://inyourbrowser’saddressbar,followed
by the host name.
Example:“https://HDM-SMART-CONNECT-F431F2”
If you cannot establish a connection to your charging
system, you can use the charging system’s IP address
as detected by the router and enter it in the address
bar instead.
Example:https://192.168.5.2
4. Owing to the secure data connection to the backend
and app, a message informing you that the security
certicateforyourPC/laptopisclassiedasuntrust-
worthywillappearontherstprogramcallviathe
Webinterface.Toavoidthis,youcanconrmthelink
toyourchargingsystemviatheextendeddisplay.
5. Initial logon
Entertheusername“admin”andthepassword
onthestartpageoftheWebinterfacetoaccess
thenextlevel.Theinitialpassword(Login)isstored
onthecommunicationmodule.
The charging system is delivered
withthe factory setting “DHCP-ON”.
3 4 5 6 71 2
Connectivity