HEIDENHAIN MANUALPLUS 4110 - Creating Tool T1: Tool Description; Entering Tool Description Text

HEIDENHAIN MANUALplus 4110 Tool Management 4.3
Creating tool T1
Enter the tool description
 Press the Tool text soft key.
(The cursor is on the
position Q 1)
 Enter text:
Press the Change text soft
key
 Enter “Roughing tool
Outside”:
Select each letter with the
arrow keys and confirm
them with the Enter key
 Save the entered text:
Press the Save soft key
 Save the text number to the
parameter Tool text Q:
Press the Take over text
no. soft key