HEIDENHAIN MANUALPLUS 4110 User Manual

HEIDENHAIN MANUALplus 4110 Machine Setup 6.4
Specify the workpiece datum
Facing a surface
 Position the tool to the workpiece
with the handwheels
 Workpiece face turning:
Machine in X direction with the
handwheel
 Retract in X direction
 Define the faced surface as
workpiece datum:
Press the Z=0 soft key
Displays:
 Actual value display for Z axis: 0
 The field highlighted in blue in the
support graphics shows the datum
offset (distance between machine
datum and workpiece datum)
 Return to the setup menu:
Press the Back soft key
 Return to the main menu:
Press the Back soft key
The tool may not be moved in Z direction after the face turning. Only after the faced
surface has been defined as the workpiece datum may the tool be moved in Z direction
again.

HEIDENHAIN MANUALPLUS 4110 Specifications

General

Brand	HEIDENHAIN
Model	MANUALPLUS 4110
Category	Control Panel
Language	English