Chapter 6 Transmission
Check of Starting Shaft & Kick Pinion
Check the wear and/or damaging of
starting shaft and gear.
Check the tightness and/or damage of
starting shaft reset spring.
Check the wear and/or damage of bush.
Check the wear and/or damage of kick
pinion.
Check the wear & damage of kick pinion
spring clip.
Check the wear & damage of starting
shaft, bearing and driving gear.
Installation of Starting Shaft &
Kick Pinion
Setting kick starting shaft first.
Turn starting shaft spring clip on crank
case convex and assembly of kick
pinion to it’s position.
Rotated the starting shaft, let starting
shaft gear and kick pinion conjoin.
To Next Page
Loading...