Chapter 7 Final Transmission Mechanism
Attention of Operation
This chapter explaining the final reduction mechanism maintenance.
The operating can be done that engine in the vehicle.
For no hurting case cap, changing the bearing of left crank shaft case after removing
the rear break of engine.
Use professional tool to change driving shaft and pull out the shaft after fixing inner
ring of bearing.
Diagnosis of Trouble
Engine starts but vehicle does not move.
Transmission gears broken.
Transmission gears burns out.
Operate of noise
Abrasion, wore and teeth damage of gear
Bearing wore and loosened.
Gear oil leaking
Too much gear oil filled.
Oil seal wear out or damage.
To Next Page
Loading...