HER CHEE ADLY RT-50 - Chapter 11: Battery Voltage Check

Chapter 11 Electrical Device
Disassembly of Battery
Remove seat
Remove rear fender
Disconnect battery wires from negative (-)
terminal first.
Check Voltage of Battery
Remove seat and remove battery
connection wires.
Check voltage between battery terminals.
Charging sufficiently : over 12.8 V
Charging insufficiently : 11.5-12.8V
WARNNING:
Check battery voltage with digital
voltmeter.
Check Charging System
Power leakage test
Turn “OFF ” the main switch.
Disconnect ground guide wire from
battery.
Connecting voltmeter to the end between
terminal (–) & ground guide wires.
WARNNING:
Check voltage according to sequence
from big to small.
Voltmeter’s fuse will be broken if the
voltage over the limitation that choosing.
Do not turn “ON” the main switch when
check current.
Current Leakage : under 1 mA
Battery
Rear fender