Attention on Operation
z Certified lubricants in cans shall be used on all the elements to be lubricated.
z After assembly, performance of all elements shall be duly checked and the
locking shall be duly verified.
z In case of an operation is performed by over 2 people, the assignment shall be
conducted in coordination and safety shall be the first priority.
z Definition of signs:
The sign given in the Service Manual shall refer to the operation methods and
observation.
OIL: Lubrication by designated lubricant.
GREASE: Lubrication by grease
Special Tool: Parts on which special tools shall be
used
General Tool: General tools shall be used
New: Replace by new items after dismounting
Attention
Dangerous and important operations
Chapter 1 Information for Preparation
To Next Page
Loading...