(1) Ignition switch (A) Push in (B) Turn to lock
SEAT LOCK
The seat lock is provided along with the
ignition switch (1).
To open the seat, insert the key (2) and turn
it counterclockwise to “SEAT OPEN”
position. The seat will release from its catch.
To lock the seat, close and push down on the
rear of the seat until locks.
Make sure the seat is secure before riding.
(1) Ignition switch (2) Ignition key
Do not try to turn the key to "LOCK" position
while riding the scooter, which may lead to loss
of vehicle control.
CAUTION
2
1
25
STEERING LOCK
To lock the steering, turn the handlebar all the
way to the left, turn the key (1) to "LOCK"
position while pushing in and remove the key.
FEATURES
Gently close the seat by hand. Sudden
dropping of the seat may result in breaking the
seat lock and malfunction of the lock.
CAUTION
FUEL TANK LID LOCK
To lock the lid push down gently until it locks
and hear a click sound to ensure the fuel tank
lid is secure before riding.
To open the lid, insert the key (2) while pushing
in and turn it clockwise to “FUEL OPEN”
position . The lid will release from its latch.
The fuel tank lid lock is provided along with
ignition switch (1).
Gently close the lid by hand. Sudden dropping
of the lid may result in breaking the lid lock
and malfunction of the lock.
CAUTION
HELMET HOLDER
Two helmet holders are located under the
seat.
To access the holder or to secure a helmet to
the holder.
î Open the seat.
î Attach/Hook the helmet strap or ring to
the helmet holder and close the seat.
1
A
B
To Next Page
Loading...
