HERO MAESTRO EDGE - Body Cover

32
(1) Bolts
î Slightly lift up the center compartment
from the rear and disconnect the boot
lamp connector (2) and USB charger
connector (3).
(2) Boot lamp connector
(3) USB charger connector
(4) Center compartment
1
4 3
2
î Remove the center compartment (4).
Installation
Installation can be done in the reverse order of
removal.
(1) Bolt
î Remove the rear grip bolts(2).
î Remove the tray fuel sub assembly bolt (1).
Body cover
Removal
î Remove the center compartment (page 31).
1
NOTE
Park the scooter on its main stand when servicing
the scooter with the center compartment
removed.
(2) Bolts
2