30
CAUTION
In this case, contact your nearest Hero
MotoCorp Authorised Dealer for assistance.
If there is a malfunction in the Immobilizer
system, the Immobilizer/Malfunction
indicator (1) would glow continuously and
start blinking after 10 seconds after the
ignition switch is turned “ON”.
· Do not put both the ignition keys in the
same key ring.
· Do not hang any heavy metal objects in the
key chain having the ignition key.
· Do not place any heavy object on the
ignition key(s).
· The system may not recognize the key's
codes if any other Immobilizer’s ignition
key is kept near the ignition switch. Engine
may not start due to interference of other
ignition key(s) with your Immobilizer
system. Hence, only registered ignition
key(s) should be used to crank the engine
otherwise continuous electric starting
attempt may lead to battery discharge.
î The ignition key is a sensitive electronic
instrument. Please take care of following
guidelines to avoid any damage to vehicle
Immobilizer system:
· Do not tamper with ignition key(s).
· Do not drop the ignition keys on hard
flooring.
· Do not play with ignition key as quick turn
“OFF” and turn “ON” , vigorously, this may
result in to false indication in Immobilizer
and in Immobilizer/Malfunction indicator
lamp.
(1) Side stand indicator
SIDE STAND INDICATOR
For the safety of the customer a side stand
indicator (1) is provided in the speedometer
panel. If the side stand is down (Ignition
Switch “ON”), an indicator lamp glows
continuously.
1
Do not expose the ignition key to high
temperature.
Do not place the ignition key near
magnetic objects (e.g. speakers).
Do not keep ignition key near equipment
having low radio frequency (e.g. TV,
walkie-talkie).
SIDE STAND SWITCH/SIDE STAND
(Optional)
A side stand switch (2) is provided in the side
stand, when the side stand is down (Ignition
Switch “ON” ( )), the switch enables the side
stand indicator lamp to glow on the
speedometer panel.
To Next Page
Loading...
