EasyManua.ls Logo

HERO XPULSE 200 PROGRAMMED FI - Tyre Inspection and Tread Wear

HERO XPULSE 200 PROGRAMMED FI
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
67
(1) Air pressure gauge
Ÿ Bumps or bulges in the side of the tyre or
the tread. Replace the tyre if you find any
bumps or bulges.
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects:
Inspection
Look for :
Ÿ Cuts, splits or cracks in the tyre. Replace the
tyre if you can see fabric or cord.
Over inflation/Under inflation will affect the
performance.
CAUTION
!!
Excessive tread wear.
Carefully inspect the tyres for any damage,
if the vehicle hits a pothole or hard object.
Replace tyres immediately when the tyres get
worn upto the wear indicator (1) on the tyre.
The tread limits are :
Tread wear
Front:1.0 mm Rear: 1.0 mm
MINIMUM TREAD DEPTH:
1

Related product manuals