EasyManua.ls Logo

HERO XPULSE 200 PROGRAMMED FI - NUTS, BOLTS & FASTENERS

HERO XPULSE 200 PROGRAMMED FI
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
Check the tread wear indicator for tyre wear.
(1) Tread wear indicator (2) Arrow mark
Ensure the arrow mark (2) on the tyre is in
the same direction as that of forward rotation
Unidirectional tyres
of the wheel, whenever the tyre is removed
and put back in case of puncture.
Operation with excessively worn tyres is
hazardous and will adversely affect traction
and handling.
Under-inflation may result in the tyre
slipping on or tyre coming off the rim.
Using tyres that are excessively worn or
improperly inflated can cause a crash in
which you can be seriously hurt or killed.
Follow all instruction in this owner’s manual
regarding tyre inflation and maintenance.
WARNING
!!
1
1
2
Always use the size and type of tyres
recommended in this owner's manual.
Inspect the spokes and wheel rims more
frequently when the vehicle is ridden in
rough terrain.
Spoke tightness and wheel centering and
alignment are essential for vehicle safety.
During the first 1,000 km, the spokes
become loose due to initial seating.
Excessively loose spokes will cause
instability at high speeds and possible loss of
control.
Check that all chassis nuts and bolts are
tightened to correct torque values.
Check that all cotter pins, safety clips, hose
clamps and cable stays are in place.
NUTS, BOLTS & FASTENERS
Tighten bolts and nuts at regular interval
shown in the maintenance schedule.

Related product manuals