Hettich 4701 - ‎5 Commissioning‎; ‎5.1 Unpacking the centrifuge‎; ‎5.2 Remove the transport lock‎

21 / 62
Rev.: 05 / 11.2023
AB4701en_SA
Commissioning
5 Commissioning
5.1
Unpacking the centrifuge
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
− Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
− Provide an adequate number of helpers.
−
Note the weight. See ⮫ Chapter 3 ‘Device overview’
on page 10 .
NOTICE
Damage to the device due to improper lifting.
− Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■ Trained user
1.
If present: Remove the packaging tapes.
2.
Lift the box up and remove the padding.
3.
Remove the accessories and store them safely.
4.
Place the device on a stable and level surface.
5.2
Remove the transport lock
Personnel:
■
Trained user