Wi-Fi 6 2x2:2 User Manual Rev: A0-00
72
CONFIDENTIAL
Callout Name Description
AP/Agent AP). If the AP mode is set to “Controller AP”,
make sure that the AP is connected to the wired
network. Agent AP automatically connects to the
controller AP if they are of the same vendor
5. WPS
Click on this option to connect with an AP which belong
to any other vendor. Make sure the “WPS” option is also
enabled in the vendor AP and the AP supports EasyMesh
configuration. This action lasts for only few seconds.
Click on the “WPS” option again if the connection has not
established within few seconds.
Click “Save & Apply” to save the advanced parameters of SSID configuration or click “Reset” to configure the
same again.
To Next Page
Loading...