ID5000 Series Smart Code Reader User Manual
91
9.7 View Log
You can view the device logs and export them to the local PC.
Click in control toolbar to open the device log window, and you can view different types of
logs, including device errors, warning, and informational log, etc.
Figure 9-7 View Log
9.8 Set Time
After enabling NTP time synchronization, the device will synchronize time according to the
configured interval.
Steps
1. Go to Config Management, and find Timing.
2. Click Setting and enable NTP Enable.
3. Set parameters according to actual demands.
Note
Configure NTP server settings before using NTP time synchronization function.
4. Click OK after settings.
To Next Page
Loading...
